Calculating Hop Bitterness: How much Hops to Use?

by Brad Smith on April 20, 2008 · 17 comments

Hops2

How much beer hops is enough? It is important to understand the quantity of hops you need to properly balance your home brewed beer. Hops are a precious and increasingly expensive commodity. Knowing exactly how much to use for your target equipment and beer style can save you a lot of money and enhance the quality of your finished beer.

Home Bitterness Units

My first book as a homebrewer was Charles Papazian’s excellent work The Complete Joy of Homebrewing. In his book he introduces the Home Bitterness Unit (HBU) defined simply as the number of ounces of hops times the alpha content for that hops. Fuggles hops have an alpha acid content of about 4.5%, so 2 ounces of fuggles hops would be 9 HBUs.

While HBUs are easy to calculate for beginners, they are not very accurate. An accurate estimate of bitterness depends on important factors like the size of the batch, size of the boil, original gravity, and boils time for the hops. HBUs just don’t do it!

A much more accurate method to determine beer bitterness is the International Bitterness Unit (IBU). One IBU is measured directly using a formula with a spectrophotometer and solvent extraction. Professionals and advanced brewers use IBUs estimates exclusively to help them design world class beers.

Beer Style guides such as the BJCP 2008 Style Guide list the bitterness range in IBUs for dozens of beer styles. This provides an excellent guide for anyone who wants to know how much hops to add for a particular beer style. You can adjust your bitterness in IBUs to be within the beer style range.

Estimating IBUs

Measuring the actual IBU content of a beer requires a laboratory. As a practical substitute for an elaborate lab, home brewers use equations to estimate the IBU content of their beer. A simplified equation from Ray Daniel’s Book Designing Great Beers for IBUs is:

  • IBUs = U% * (ALPHA% * W_OZ * 0.7489) / (V_Gal)

Where U% is the hop utilization in percent, ALPHA% is the percent alpha for the hop variety, W_OZ is the hop weight in ounces, and V_GAL is the volume of hops in gallons. Note that the hop utilization U% varies by boil time, wort gravity, and a number of other factors. Also, this gives the IBUs for a single hop addition. If you have multiple hop additions, you need to add up the IBUs from each.

In this equation, the utilization percentage is the one factor that varies depending on equipment used, brewing methods used, boil time, boil size, and boil gravity. The variations between different hop estimation equations basically come down to different ways of estimating the utilization.

Hop Utilization: Practical Application

If your eyes glaze over looking at IBU equations – here’s a practical guide. Hop utilization increases with boil time, so the longer you boil your hops the more bitterness and IBUs you will add. Late addition hops (boiled for 5-10 minutes) add very little bitterness, and are used primarily for aroma. Bittering hops are usually added for the full boil time (60-90 minutes).

Hop utilization also increases as you lower the gravity of your boil. If you are brewing a high gravity beer, or an extract brewer using a partial batch boil (small pot) you will get much lower utilization. This is why extract brewing requires more hops (in general) than all-grain brewing. Since different brewers use different equipment, it is important to take into account your own boil size and boil gravity when estimating the bitterness of your beer.

IBU Estimation

Three equations to estimate utilization and IBUs are most often used: Rager, Tinseth and Garetz. The equations differ in the way that they estimate the utilization percentage described earlier. Rager is most often associated with extract and partial mash brewers. The Rager equation takes original gravity of the boil into account, and tends to produce IBU estimates that are on the high side of the three equations.

Tinseth is often associated with all-grain brewers, or brewers that do full batch boils. It generally produces lower IBU estimates than Rager, but is considered very accurate. BeerSmith uses Tinseth by default, though you can change this from the Options dialog. The Garetz equation is less popular than the other two methods, but generally provides estimates somewhere between Rager and Tinseth.

I won’t go into the details of calculating each equation, though you can visit this site if you want to build your own spreadsheet or calculator. A quick google search on any method will yield a number of online calculators and spreadsheets. In addition, all major brewing software programs including our own offer the ability to estimate IBUs directly from the recipe. I recommend using a program or spreadsheet, as the complexity of multiple hop additions and late extract additions make it tedious to calculate by hand.

It’s important to understand that the three estimation methods will provide widely varying results in some cases. Each provides only an estimate of bitterness, and none are perfect or all encompassing. I would not spend too much time worrying the differences. Choose a single estimation method and stick with it.

How Much Hops is Enough?

Now that we understand the basics of calculating IBUs, we come back to the original question of how much is enough? The answer varies by the style of beer we are targeting. The bitterness needed for an Imperial Stout is dramatically higher than a simple Pilsner. In general, beers with higher gravity need more bitterness to offset the maltiness of the beer. Similarly styles such as India Pale Ale where bitterness is a significant flavor component require more hops.

Fortunately, a number of beer style guides offer IBU ranges needed to achieve a particular beer style. The most widely used US style guide is maintained by the Beer Judge Certification Program (BJCP). The 2008 BJCP Style Guide provides detailed IBU ranges for dozens of popular beer styles from around the world. Other countries also have beer style guides that provide similar information. Programs like BeerSmith have the style guide built in for easy reference when designing a recipe.

Lets look at a BJCP example: From the standard, an American Amber Ale should have between 20 and 40 IBUs. If we target the middle of the range, 30 IBUs is about right. Using a spreadsheet or brewing software, its easy to adjust your hops quantity and boil times to reach the target.

In these hop starved times, I recommend using a single bittering hops addition for the full length of your boil, followed by a single aroma hops addition near the end of the boil (if appropriate) to reach your target bitterness level.

Hopefully this article helped to clear up how much hops you really need in your next batch of beer. Thanks again for joining us here on the BeerSmith Home Brewing Blog – and don’t hesitate to subscribe or drop a free guest vote on BrewPoll using the voting button on the right if you enjoyed this article.

Related Beer Brewing Articles from BeerSmith:

Enjoy this Article? You'll Love Our BeerSmith Software!
  Don't make another bad batch of beer! Give BeerSmith a try - you'll brew your best beer ever.
Download a free 21 day trial of BeerSmith now

{ 13 comments… read them below or add one }

nicklas27516 November 6, 2008 at 8:44 pm

reply to nicklas27516@mail.com
I have 24 acreas in North Carolina of free land currently used to harvest hay for cows but looking to find a more productive prosperus way to utilize my land gaining full potential capitalizing on the land.
I see the shortage of hops throughout the world and wonder if I have a possibility to use my land for a more income potential prosper.
I would like to know if the potential is there to utilize my land to produce hops and generate a great income potential?
I’ve had great effort producing large corn fields and hay fields but understand hops may be a hole different story of farm work. I have all neccessary equipment to do any task required on a farm from plowing seeding to harvesting.
Is the potential there for me and hops to produce income?

Brad Smith November 6, 2008 at 10:28 pm

Given the hop shortage, it is always possible but it would require some substantial effort to determine which varieties are appropriate, how to plant, care for a and sell the finished product. Also, I believe it takes about two years for hops to reach full production once you plant them.

Sallina April 15, 2011 at 2:22 pm

I was wondering about how many mg of hops are in a beer? I wanted to take the hops supplement, I need to take enough to equal about fifteen or so beers per day. It seems that hops is a great way to inhance one of my body parts, but I’d have to drink too many beers a day, lol. Also do you think this is a safe amount to take on a regular basis? I am 5’3” and 103 lbs. Thanks : )

Brad Smith April 17, 2011 at 7:23 pm

I really don’t know the answer to this question – does anyone else know offhand?

Brad

Sheree February 26, 2013 at 6:43 pm

Excellent blog here! Also your website loads up very fast!
What web host are you using? Can I get your affiliate link to your host?
I wish my web site loaded up as fast as yours lol
See this: Sheree, http://Abbreviation.Wroclaw.
pl

Shani May 27, 2013 at 3:13 am

Calculating Hop Bitterness: How much Hops to Use?
| Home Brewing Beer Blog by BeerSmith

Cris January 21, 2014 at 12:15 am

How do I determine the weight of hops if I have 3 additions.
Thanks!

Alisdair November 2, 2014 at 8:04 am

I think its also important to take into account the isomerisation during wort cooling, as it can account for additional minutes. This is especially important if you add lots of hops at the end of boil. For instance I calculated for one batch, that for a very mild Ale with little above 10 IBUs the Tinseth formula implies a 5 minute boil with the amount of hops that I used, however taking into account the alpha-isomerisation during cooling it adds another 4,5 minutes if I cool the wort to 40°C in 30min, so half a minute of boil time is sufficient.

ferryman March 4, 2015 at 5:08 pm

Many of these recipes and articles do not mention cone hop/pellet hop equivalents. How does one work this out?

Barak January 25, 2016 at 11:24 pm

The formula as stated above, U% * (ALPHA% * W_OZ * 7489) / (V_Gal), is incorrect. For example, I plan on using 2 oz. of 5.2% alpha Hallertau in an altbier, O.G. 1.045, 6 gals boiled for 60 minutes with estimated utilization of 30%. Using the original formula, IBU = 30 * (5.2 * 2 * 7489)/6 = 389,428, clearly far too large. The correct formula is actually U% * (ALPHA% * W_OZ * 0.7489) / (V_Gal). Charlie Papazian in the “The New Complete Joy of Home Brewing” gives the formula (converting the units to the same as above) as IBU = (W_OZ * ALPHA% * U%)/(V_Gal * 1.34). Note that 1/0.7489 = 1.34 when rounded. Smith’s formula would be correct if instead of using U and ALPHA as percentages, one were to convert them to a fraction out of one, i.e U = 30% =.3, ALPHA = 5.2% = 0.052. I’d also like to point out that while weights can measured quite accurately, the Hop Utilization is mostly an educated guess and you’d be fooling yourself to think you know it beyond two significant digits. That suggests we could replace 0.7489 with .75, or even 3/4, and that lends itself to some easy back-of-the-envelope-math, especially when starting with a V_gal that is a whole multiple of 3. Might come in handy when you are standing in front of the hops fridge at the brew store and don’t have your spreadsheet handy. In my case, IBU = 30 * ( 5.2 * 2 * 3)/ (6 * 4) = 30 * 5.2 / 4 = 30 * 1.3 = 39.

Brad Smith January 25, 2016 at 11:31 pm

Thanks – I corrected the typo.

Phil August 28, 2019 at 1:32 pm

With regard to Utilization %, is there a formula that a newer homebrewer can use to determine a somewhat accurate number ?

Damo88 December 5, 2023 at 10:03 pm

Hi Brad with hop additions I am finding a difference in the amount of IBUs for the same hop addition, I recently had to re-activate my basic subscription on a new laptop from 2015 as my computer died. The same addition in my stock IPA @ 5mins citra (12%AA) is giving me 21.8 IBUs where in the old recipe I had printed has 9.3IBUs for an AA of 13.3% so its not really adding up to me as its the same malt bill mash temp etc. There is also smaller increases in IBUs as well across the recipe for the same amounts, so is a new formula for IBUs or do i need to change something, I doubt my IPA will be 92 IBUs for the same recipe.

Leave a Comment

{ 4 trackbacks }

Previous post:

Next post: