The Right Way to Hydrate Dry Yeast for Beer Brewing

by Brad Smith on January 3, 2018 · 9 comments

This week I take a look at the proper method for hydrating dry yeast for beer brewing to maximize your viability and produce a healthy fermentation.

Dry Yeast for Home Brewing

While dry yeast does not offer quite the selection of liquid yeast, it does have some significant advantages as it is much easier to store, can be stored much longer, and is easier to prepare. I like to keep several packets in my fridge for the times when my schedule changes to let me brew, but I may not have several days in advance to prepare a yeast starter.

Though you don’t usually need a starter when working with dry yeast, proper hydration is important and there is a process I use every time to get the best results from my dry beer yeast.

Hydrating Dry Yeast

When hydrating dry yeast, I like to use GoFerm, which is a yeast nutrient from Scott Laboratories specifically designed to aid in the hydration of dry yeast. GoFerm has micronutrients that the yeast cells soak up that will aid in re-hydration and also the viability of the cells.

Scott Labs recommends adding GoFerm at the rate of 1.25 parts GoFerm per 1.0 part of yeast. This works out to 14.4 grams of GoFerm for a 11.5 g brewing yeast packet or 6.25 g of GoFerm for the smaller 5 g packets often used for wine. They recommend using 20x by weight of water to hydrate the GoFerm. If you do the math this is about 280 ml (9.5 oz) of water for the 11.5 g packet of yeast or 125 ml (4.2 oz) of water for the smaller 5 g yeast packets.

The process I use is as follow with all amounts scaled to fit a typical 11.5 g yeast packet. If you are using smaller packets or a multiple packets you may need to scale the numbers as outlined above.

  • Add 280 ml (9.5 oz) of luke-warm water (for 11.5 g yeast packet) at 104 F (40C) to a sanitized bowl or beaker. Mix in the 14.5 g of GoFerm until it is well blended.
  • Next add the dry yeast packet and mix well.
  • Let the mixture sit for 5-10 minutes, then add small amounts of wort to slowly bring the temperature down.
  • I will repeat this process every 5-10 minutes or so – mixing in small amounts of wort to being the temperature of the mixture down. However you want to avoid changing the temperature by more than 10 degrees F within a single 5 minute period.
  • During these breaks, I will aerate my wort thoroughly with an oxygen wand.
  • Once the temperature is within 10 degrees F (5 C) of the temperature of the wort, you can pitch the yeast-GoFerm mixture and begin fermentation.

The above process will give you the best results when working with dry yeast. Thanks for joining me on the BeerSmith Home Brewing Blog. Be sure to sign up for my newsletter or my podcast (also on itunes…and youtube…and streaming radio station) for more great tips on homebrewing. Also check out the How to Brew Video series I shot with John Palmer if you want to learn more about all grain brewing.

Related Beer Brewing Articles from BeerSmith:

Enjoy this Article? You'll Love Our BeerSmith Software!
  Don't make another bad batch of beer! Give BeerSmith a try - you'll brew your best beer ever.
Download a free 21 day trial of BeerSmith now

{ 8 comments… read them below or add one }

Kyle January 4, 2018 at 1:18 pm

You state liquid when I believe you mean dry: “the above process will give you the best results when working with liquid yeast”

David January 5, 2018 at 8:50 am

Re. the water being at 104 F (40C) —
Interesting. That’s significantly higher than the temp recommended by the manufacturers, IIRC. I think Fermentis recommend 25-30C and Lallemand 30-35C.

Brad Smith January 5, 2018 at 4:45 pm

The higher temps work well with the GoFerm and I believe help the yeast as well.

Thomas sjoberg January 7, 2018 at 3:29 pm

Is this a technique founded on personal experience or a best recommended technique by brewers and dry yeast producers? Thanks

Sean Null January 7, 2018 at 4:12 pm

It just seems like a lot of extra steps and time consuming. Why not just pitch the dry yeast into wort that has had nutrient added at the end of its boil? I don’t have an oxygen wand but once pitched I cap the carboy and roll on the floor for ten minutes. I used to hydrate in the past but have read articles that it makes no difference in lag time. I think. Not positive

Johnny Cosgrove December 20, 2019 at 2:17 pm

Do you use Go-Ferm when re-hydrating dry lager yeasts also?
Getting ready to start a lager using Saflager S-23 and was a little worried that the recommended initial temperature of 104 F for go-ferm would damage a lager yeast or encourage diacetyl formation.
Have used Go-Ferm to hydrate yeasts for meads and wines and some saisons for the last couple years.

thanks, J.C.

Jim B April 5, 2022 at 8:01 am

I’m detting ready to re-hydrate 2 packages of Safale US-05. I purchased a pound of Fermax and was wondering if I can use Fermax instead of Go-Ferm ?

Brad Smith April 6, 2022 at 12:01 pm

Yes that should work fine as well – just use the recommended amount from the package.

Leave a Comment

{ 1 trackback }

Previous post:

Next post: