Author Topic: using HOTPOINT RLA80 as a kegerator  (Read 1762 times)

Offline Keysworth

  • BeerSmith Apprentice Brewer
  • **
  • Posts: 3
  • BeerSmith 2 Rocks!
using HOTPOINT RLA80 as a kegerator
« on: July 08, 2020, 10:35:19 AM »
has anyone just happened to have converted a HOTPOINT RLA80 larder fridge to a kegerator? I ask because I want to put the tap in the side of the fridge, but not sure how safe it is to drill a hole through the wall. Someone mentioned that it may have gases in the lining that would if anyone has successfully converted this particular model...or has any would be much appreciated...thanks in advance

Offline Kevin58

  • BeerSmith Grandmaster Brewer
  • *****
  • Posts: 586
  • God is great, beer is good and people are crazy
Re: using HOTPOINT RLA80 as a kegerator
« Reply #1 on: July 08, 2020, 10:54:30 AM »
It is probably safer to put a faucet through the door than it is the sides. Or you could just not cut any holes at all and use picnic taps on your kegs. That way you can still use the refrigerator for its intended purpose later.
If you?re stressing over homebrewing, you?re doing something wrong.
- Denny Conn

Offline Oginme

  • BeerSmith Grandmaster Brewer
  • *****
  • Posts: 3150
  • Goats, guitars, and a home brew; Life is good!
    • Longvu LaManchas
Re: using HOTPOINT RLA80 as a kegerator
« Reply #2 on: July 08, 2020, 11:57:48 AM »
Kevin58 has the safest way to go about installing faucets -- through the door.  If you want to go through the sides, there may be lines and wiring running through them.  If I wanted to run them through the side, I would consult an appliance repair service as they would have access to repair diagrams of the electronics, coolant lines, and any other such lines running through the sides or back of the refrigerator.

Recycle your grains, feed them to a goat!