Author Topic: Equipment Profile Help  (Read 3066 times)

Offline beerman007

  • BeerSmith New Brewer
  • *
  • Posts: 2
  • Mmmmmm Beer...
Equipment Profile Help
« on: April 07, 2015, 06:44:33 PM »
At this point I am only making 5 gallon batches and I'm going to be using a 10 gallon cooler HLT, 10 gallon cooler MLT, and a blichmann 10 gallon boil kettle. Suggestions on the best equipment profile.  Could I use the 10 gallon profile that is preloaded and scale it to 5 gallon batch or would it be better to create an equipment profile specifically for what I'm using?  If I should set one up what are the best specs?  Thanks for the help.

Offline Oginme

  • BeerSmith Grandmaster Brewer
  • *****
  • Posts: 3123
  • Goats, guitars, and a home brew; Life is good!
    • Longvu LaManchas
Re: Equipment Profile Help
« Reply #1 on: April 08, 2015, 09:38:52 AM »
First, view the video Brad has posted on setting up your equipment profile and threads available on the forum which explain further the steps that need to be taken.  I would recommend copying an equipment profile that is close to what you have for equipment, renaming it, and then go through each input of the profile and customize it to your equipment.  The more accurate you can be in providing this information, the better the program will be at predicting the results of your brew day.
Recycle your grains, feed them to a goat!

 

modification