Author Topic: Changing from gal to barrels and oz to lbs for commercial systems  (Read 2752 times)

Offline BCBrewer

  • BeerSmith New Brewer
  • *
  • Posts: 2
  • BeerSmith 2 Rocks!
Hello all,

I've looked all over BeerSmith 3.0 and can not find where or even if I can do this. Is it possible? I sure hope so sice I purchased the pro version. Thanks in advance.

Online BOB357

  • BeerSmith Grandmaster Brewer
  • *****
  • Posts: 681
  • Beer is my bucket list!
Re: Changing from gal to barrels and oz to lbs for commercial systems
« Reply #1 on: June 20, 2018, 09:36:19 PM »
First, I think you need to go to Options/units/Batch volume units and select barrels. Once you've done that, select the appropriate volumetric volumes you want to use for hops, yeast, etc. There are also some other options you may want to change from default values. Next you want to set up an equipment profile that closely reflects your brewhouse. After that, set up some mash profiles. The profiles will likely need to be tweaked over a few batches to get them dialed in. 
That should put you on the right page.
Bob

Offline BCBrewer

  • BeerSmith New Brewer
  • *
  • Posts: 2
  • BeerSmith 2 Rocks!
Re: Changing from gal to barrels and oz to lbs for commercial systems
« Reply #2 on: June 21, 2018, 04:20:06 AM »
Extremely helpful Bob! Thanks for the quick reply!