« previous next »
Pages: [1]

Author Topic: Brewer's Edge BS Profile  (Read 7191 times)

Offline ArrogantBastardAle

  • BeerSmith Apprentice Brewer
  • **
  • Posts: 11
  • BeerSmith 2 Rocks!
Brewer's Edge BS Profile
« on: September 17, 2017, 08:56:44 PM »
Does anyone have a tested profile for the Brewer's Edge system (preferably No Sparge) that they are willing to share?

Thanks!
Logged

Offline Ck27

  • BeerSmith Grandmaster Brewer
  • *****
  • Posts: 529
  • BeerSmith's Unofficial Spam Police.... Do Not Spam
Re: Brewer's Edge BS Profile
« Reply #1 on: September 17, 2017, 09:44:03 PM »
Quote from: ArrogantBastardAle on September 17, 2017, 08:56:44 PM
Does anyone have a tested profile for the Brewer's Edge system (preferably No Sparge) that they are willing to share?

Thanks!

This????
https://www.williamsbrewing.com/BREWERS-EDGE-MASH-BOIL--P4216.aspx

If so google the grainfather profile the robobrew, this system and the grainfather share a lot so its basically one for all.
Logged

Offline KipDM

  • BeerSmith Master Brewer
  • ****
  • Posts: 91
  • Brewing: makes friends and settles nerves!
Re: Brewer's Edge BS Profile
« Reply #2 on: October 19, 2017, 03:19:52 PM »
I would actually disagree with the above just because it is not a RIMS system like the Grainfather [not sure how much this effects efficiency].
However it does hold a full grain bill and can be used for a full sparge so I would just use the regular 5 gallon setup.
Logged
KipDM
On Tap: Autumn Amber, Columbus Warrior DIPA
Primary: none :(
Secondary: Pumpkin Spice Ale

Offline raybilyk

  • BeerSmith Apprentice Brewer
  • **
  • Posts: 3
  • BeerSmith 2 Rocks!
Re: Brewer's Edge BS Profile
« Reply #3 on: August 16, 2018, 11:04:28 AM »
So I guess that there isn't a profile...  :(
Logged

Offline Kevin58

  • BeerSmith Grandmaster Brewer
  • *****
  • Posts: 586
  • God is great, beer is good and people are crazy
Re: Brewer's Edge BS Profile
« Reply #4 on: August 16, 2018, 07:15:58 PM »
Whatever system you have it is always best if you create your own, personalized, equipment profile. The way you use any given system may not be the same way someone else uses it. Even Brad Smith suggests that the equipment profiles that come in Beersmith are only to be viewed as starting points. You need to take your own, actual measurements and make your own equipment profile. Here are two tutorials that can help...

https://youtu.be/QmW7pwQP5mQ

https://youtu.be/HwEbjOt8OR8
Logged
If you?re stressing over homebrewing, you?re doing something wrong.
- Denny Conn
Pages: [1]
« previous next »
 

Sitemap