- Joined
- Aug 25, 2008
- Messages
- 2,004
- Reaction score
- 0
My new IC chiller is big and heavy, so I don't think it would sit well on the 12" straight bazooka I've got. I was going to use that in brews with lots of hops or esp. when I use plugs.
Is there anything else I could put over the drain valve before filling with wort that would stay in place despite the stirring and the IC coming down into the keg? The boiler/keg has a typical 1/2" nipple inside, on which I put a coupler to protect the threads. Attached is a pic of the boiler. Thanks.
Is there anything else I could put over the drain valve before filling with wort that would stay in place despite the stirring and the IC coming down into the keg? The boiler/keg has a typical 1/2" nipple inside, on which I put a coupler to protect the threads. Attached is a pic of the boiler. Thanks.