Author Topic: carbonation problem  (Read 3717 times)

Offline Simie

  • Turtle Pointe Brewery
  • BeerSmith Brewer
  • ***
  • Posts: 45
carbonation problem
« on: September 23, 2010, 03:00:37 PM »
Greetings, I have a chest freezer with temp controller and 4 taps. I pressurize at about 8 psi. My 3/16 in beer lines are 5 feet long. Why would the Kolsch and the lagers come out half foam, but the pale ales come out perfect????? I'm stumped??


Offline BobBrews

  • Bob Brews Beer
  • BeerSmith Grandmaster Brewer
  • *****
  • Posts: 260
  • I Brew, I Drink, N'uff said.
    • BIAB
Re: carbonation problem
« Reply #1 on: September 26, 2010, 06:23:04 AM »

       Here is a link that will help you. save the link it has good information and a few charts to print and keep.        It helped me a lot getting my kegarator set up. It does take time to balance out.

       One thing that I sometimes forget. I charge at 30 lbs for a few days before changing to my regular serving pressure (8 lbs?). I should let the pressure out of the keg before I put it on line but I sometimes forget. That corny keg is still at 30 lbs until l let off the pressure so it foams until I pull the release valve.
Bob Brews
Brew in a Bag Brewer BIAB