Since upgrading to the current build one recipe keeps changing the saved Equipment profile associated with the recipe - in this case "Lost Trub and Chiller" volume is changed to 3 gallons and "Top up water" is changed to 5 gallons. I change it back (1.65 and 1) and save the recipe, when I open it again it has reverted back to these values. All associated values are rewritten also so Boil volume changes if the calculate check box is selected, Evaporation rate changes etc. Subsequent IBU calculations are clearly also changed. This is major bug obviously.
One other recipe also had this problem after upgrading, or rather when I opened the recipe the IBU calculation was wildly off and I discovered that the culprit was the equipment profile associated with the recipe - a saved profile BTW - had wrong values for Lost Trub and Top up water. However after saving the equipment profile stuck for that recipe.
One other recipe also had this problem after upgrading, or rather when I opened the recipe the IBU calculation was wildly off and I discovered that the culprit was the equipment profile associated with the recipe - a saved profile BTW - had wrong values for Lost Trub and Top up water. However after saving the equipment profile stuck for that recipe.