• Welcome to the new forum! We upgraded our forum software with a host of new boards, capabilities and features. It is also more secure.
    Jump in and join the conversation! You can learn more about the upgrade and new features here.

Help with Cobra Tap Tower

Krypis

New Forum Member
Joined
Mar 25, 2019
Messages
1
Reaction score
0
Hi

I have just purchased and mounted a Cobra Tap Tower with 2 faucets and plan on having the kegs in a fridge in the basement directly underneath the kitchen.

I?m struggling with removing the 2 beer lines that came pre installed.

It seams like they become hung up on the gasket/ threads.

Can I sacrifice the casket an buy a new one?

See picture
 

Attachments

  • CB8B6677-AA73-4122-8C83-3E643359D0B9.jpeg
    CB8B6677-AA73-4122-8C83-3E643359D0B9.jpeg
    1.7 MB · Views: 9

dtapke

Grandmaster Brewer
Joined
Nov 5, 2018
Messages
467
Reaction score
8
Location
Portage, Wisconsin
That picture isn't exactly helpful. the cobra is designed to be run with glycol, are you trying to remove the glycol lines?  you should have two 1/4" JG beer lines and two 3/8" glycol lines. The tower is not designed to be disassembled.

also, depending on the distance travelling you may want to get glycol cooled tap lines, and make sure you're running the correct line balance. remote kegs are a bit tricky... JG makes a nice line/system for this.
 
Top