Author Topic: Est Final Gravity  (Read 5004 times)

Offline mcfly6667

  • BeerSmith Apprentice Brewer
  • **
  • Posts: 5
    • Boise Brew Blog
Est Final Gravity
« on: June 08, 2016, 02:12:53 PM »
Kind of new to BS2 but I really like playing around with a recipe and seeing the settings change in the Style Guidelines section.
I'm a little confused however by part of it that doesn't make sense.  The est FG  to the right of the colored slider bars.
In my example the 1.017 is way to high for this simple Brown Ale recipe I am setting up.  Thus it throws off what it expects to be my ABV
If I go into the "fermentation" tab for this recipe that 1.017 is still there and greyed out.
I cant seem to find where to go to adjust this down a bit.  Is it my equipment profile that is making this est FG so high ?
Or another way to ask, where does BS2 get this "estimated FG" number from?
Bottled: Simcoe IPA, BerlinerWeisse
Primary: Dirt Track Blonde, Bochet Meade, Flanders Red
Secondary:
Aging: Cherry Meade, Mystery Lambic

Offline Oginme

  • BeerSmith Grandmaster Brewer
  • *****
  • Posts: 3115
  • Goats, guitars, and a home brew; Life is good!
    • Longvu LaManchas
Re: Est Final Gravity
« Reply #1 on: June 08, 2016, 05:10:40 PM »
BeerSmith calculates the FG based upon the extraction value of the grains/extract/sugars in the recipe, the efficiency of the system, the mashing temperature which dictates the amount of maltose which is produced in mashing versus higher chain dextrins which are mostly unfermentable, and the attenuation of the yeast strain which is being used. 

If you are looking to adjust the finishing gravity of a given recipe, you can lower the mash temperature to lower the FG or raise it to increase the FG.  If you are making an extract recipe, substitute some simple sugars (table sugar or corn sugar) for some of the extract.  These simple sugars will ferment out completely as compared to the extract.

Another thing to look at is the strain of yeast you are using.  Some strains do better at fermenting all the sugars which are available.  These strains usually are talked about as being 'drier' in their flavor descriptions.  Most yeast companies list the apparent attenuation for their yeast strains.
Recycle your grains, feed them to a goat!

Offline brewfun

  • BeerSmith Grandmaster Brewer
  • *****
  • Posts: 2288
  • Malt dust is just alcohol's glitter
Re: Est Final Gravity
« Reply #2 on: June 09, 2016, 08:00:31 AM »
Or another way to ask, where does BS2 get this "estimated FG" number from?

BeerSmith calculates FG from the Max Attenuation field of the yeast you choose. You can access this by double clicking the yeast in recipe design, or through the Starter tab. If a recipe has no yeast, it'll default to around 72% attenuation.

For worts made at lower temperatures, the increased attenuation slope is adjusted in Options > Advanced.

Beer Appreciation is the space between pints.

Offline pedrovic

  • BeerSmith Apprentice Brewer
  • **
  • Posts: 10
  • BeerSmith 2 Rocks!
Re: Est Final Gravity
« Reply #3 on: August 24, 2021, 06:56:35 AM »
I had (or maybe I have yet) a similar doubt about a checkbox in this tab. I posted this in http://beersmith.com/forum/index.php?topic=21936.0

 

modification