Author Topic: Brewsheet - Volume/Gravity checks  (Read 3246 times)

Offline Chad

  • BeerSmith Apprentice Brewer
  • **
  • Posts: 17
Brewsheet - Volume/Gravity checks
« on: January 09, 2010, 10:28:41 PM »
Something I have thought would be good for a while now is on the Brewsheet in the Boil Wort section is to have a 1/2 time, and possibly 1/4 time, volume and gravity checks.

So at half time through the boil on the brewsheet it will tell me I should be at such a volume (with expansion factor) and such a gravity so I can check it. At the moment I have to work this out manually. And then again at 1/4 time remaining.

It's just a small thing, but would be useful. Cheers.

Offline MaltLicker

  • Global Moderator
  • BeerSmith Grandmaster Brewer
  • *****
  • Posts: 2004
    • Blue Ribbon Brews
Re: Brewsheet - Volume/Gravity checks
« Reply #1 on: January 10, 2010, 02:54:03 PM »
I put this line in my custom report.  It's not exactly what you wanted, but it's enough for me to see if I'm on my way.  Generally, if I'm off the pre-boil, I'm off the same amount at the end, and progress is usually linear.  I decide along the way whether to boil longer or add DME or sugar to reach the target OG, depending on the gap. 

---BOIL PROCESS-----------------------------
Est Pre_Boil Gravity: 1.050   Est OG: 1.059 SG
Boil Ingredients
Boil         Amount       Item                                      Type         
60 min       0.50 oz      First Gold [9.50 %]  (60 min)             Hops         
25 min       0.50 oz      Fuggles [4.50 %]  (25 min)                Hops

 

modification