I ran across this the other day. The batch sparge volumes are not calculated correctly.
I verified the error by doing the following:
Create new recipe
Add 24.5 lbs of any base malt, set the batch size to 10.5 lb and picked a profile such as "15 gal kettle, 12 gal igloo cooler)
Went to mash details page and selected "single infusion, full body, Batch sparge". The default result is
"drain mash tun, batch sparge with 2 steps (8.65 gal, 4.46 gal) of 168F water"
With those volumes alone, you'd have 13.37 gal of water, let alone what would drain out of the mash tun
If you go to the "water volumes" page, you'd see
Water available from mash: 4.72 gal
Sparge vol: 8.65 gal
est pre-boil vol: 12.57 gal
Can anyone else replicate this?
I verified the error by doing the following:
Create new recipe
Add 24.5 lbs of any base malt, set the batch size to 10.5 lb and picked a profile such as "15 gal kettle, 12 gal igloo cooler)
Went to mash details page and selected "single infusion, full body, Batch sparge". The default result is
"drain mash tun, batch sparge with 2 steps (8.65 gal, 4.46 gal) of 168F water"
With those volumes alone, you'd have 13.37 gal of water, let alone what would drain out of the mash tun
If you go to the "water volumes" page, you'd see
Water available from mash: 4.72 gal
Sparge vol: 8.65 gal
est pre-boil vol: 12.57 gal
Can anyone else replicate this?