ouldefauder
Apprentice
- Joined
- Jan 21, 2013
- Messages
- 16
- Reaction score
- 0
I am attempting to make a dual fermentation chamber. I intend to be able to provide heat or cool as required to two separate fermentation areas. Temperatures between the two chambers could differ by as much as 30 degrees F. The entire system will be 115/120 vac except for for the pump in the freezer which will be 12 v dc. I have ordered 2 STC1000 temperature controllers and have 2 Hayden 503 coolers. I will use copper heat sinks from CPU coolers with attached aluminum blocks in which the Morheat cartridge heaters are installed to provide heat. Fans are 4.7 x 1.5 170 cfm, 115 volt units. I intend to purchase a 17cu foot fridge to provide the cool from the freezer section and perhaps in the future use the frig portion to cool kegs exiting to dispensers. Currently bottling. Has anyone tried this and if so do you have any advise?
Carpentry and electrical or electronics are not an issue for me. Its what I do.
Carpentry and electrical or electronics are not an issue for me. Its what I do.