Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to the new forum! We upgraded our forum software with a host of new boards, capabilities and features. It is also more secure. Jump in and join the conversation!
You can learn more about the upgrade and new features here.
There is a default profile set that way. Its the 2nd to the last default profile I believe. Check notes at the end.
Pot and Cooler (10 Gal/37.8 L) - All Grain
Batch Size: 10.00 gal
Mash Volume: 10.00 gal
Boil Volume: 12.57 gal
Mash Tun Weight: 9 lbs
Evaporation Rate: 9.0 % Mash Tun Specific Heat: 0.30 cal/g-deg C
Boil Time: 60 Mash Tun Deadspace: 0.80 gal
Top-up for Boiler: 0.00 gal Equip Hop Utilization: 100.00 %
Losses to Trub/Chiller: 1.00 gal Cooling Loss (%): 4.00
Top up water for Fermenter: 0.00 gal
Notes: Popular 10 gallon setup for all grain brewing. Uses a 10 gallon water cooler as mash tun for single infusion mashes and a 15 gallon brew pot for full size boil of the 12+ gallons of wort.
Can I easily change this to 5 gallons without interfering with the values set for 10 gallons? In other words, will 10 gallons boil off (evaporate) more?