Author Topic: Barley Crusher Grain Mill Review  (Read 6275 times)

Offline BeerSmith

  • Brewer, Author, Patriot
  • BeerSmith Administrator
  • BeerSmith Grandmaster Brewer
  • *****
  • Posts: 5560
  • BeerSmith - take the guesswork out of brewing!
    • BeerSmith
Barley Crusher Grain Mill Review
« on: April 12, 2008, 04:41:17 AM »
From the blog:
  A short review of the Barley Crusher Grain Mill by BC products.

  I have one, and really like it by the way...

Brad
Get a free trial of BeerSmith 3 here

Offline bonjour

  • Global Moderator
  • BeerSmith Grandmaster Brewer
  • *****
  • Posts: 566
    • Beer du Jour
Re: Barley Crusher Grain Mill Review
« Reply #1 on: April 15, 2008, 08:12:38 PM »
My LHBS has the prototype.  That prototype has crushed an estimated 5,000,000+ lbs of grain.  That is what sold me.

Mine has the 14 lb hopper and I drive it with a 3/8 drill.

Fred

Offline Jazong

  • BeerSmith New Brewer
  • *
  • Posts: 2
Re: Barley Crusher Grain Mill Review
« Reply #2 on: May 30, 2008, 10:46:08 AM »
Sunday I will be buying a Barley Crusher malt mill. I am looking for advice on the setting I should be using. I would like to maximize efficiency without creating all kinds of laudering problems. I am a five gallon brewer and I recirculate using a HERMS during my entire mash at a rate of .75 gallons per minute. My mash screen is a domed false bottom, the kind they sell at MoreBeer. All of my plumbing is 1/2". If someone does or has ever run a similar system would you help me choose a crush setting for my new mill. Thank you.

Cheers,

JAson

 

modification