Author Topic: Whirlpool temps on the Brewstep report  (Read 3175 times)

Offline Steck44

  • BeerSmith Apprentice Brewer
  • **
  • Posts: 5
  • BeerSmith 2 Rocks!
Whirlpool temps on the Brewstep report
« on: June 16, 2018, 08:19:37 AM »
In beersmith 3 do we have the ability to get the whirlpool/steep temps to show on the brewstep report along with the times?

Offline Oginme

  • BeerSmith Grandmaster Brewer
  • *****
  • Posts: 3115
  • Goats, guitars, and a home brew; Life is good!
    • Longvu LaManchas
Re: Whirlpool temps on the Brewstep report
« Reply #1 on: June 16, 2018, 10:52:58 AM »
Yes.  You can set the times and temperatures of hop additions which will be reflected in the estimated IBU.  There is also a delay "addition" (appropriately titled 'Whirlpool Delay')which will if you add it to the recipe and set the entire time of whirlpool from flame out will give you a timer delay in the whirlpool additions to account from flame out to the first addition at temperature xxx degrees.
Recycle your grains, feed them to a goat!

Offline Steck44

  • BeerSmith Apprentice Brewer
  • **
  • Posts: 5
  • BeerSmith 2 Rocks!
Re: Whirlpool temps on the Brewstep report
« Reply #2 on: June 16, 2018, 01:15:02 PM »
Oginme,

Thanks for the response. A couple things. For the brewstep print out can it also display the temp along with the time? For what you are referencing where is this located? I have not been able to find such a thing.

Offline Oginme

  • BeerSmith Grandmaster Brewer
  • *****
  • Posts: 3115
  • Goats, guitars, and a home brew; Life is good!
    • Longvu LaManchas
Re: Whirlpool temps on the Brewstep report
« Reply #3 on: June 16, 2018, 02:52:47 PM »
At this time, the temperatures do not appear on the timer or brew steps print out.  The temperatures are set in the hop ingredient when you change the item to a whirlpool/steep addition.  The Whirlpool pause is added as if it were another hop and is located in the hop profiles.
Recycle your grains, feed them to a goat!

Offline BeerSmith

  • Brewer, Author, Patriot
  • BeerSmith Administrator
  • BeerSmith Grandmaster Brewer
  • *****
  • Posts: 5561
  • BeerSmith - take the guesswork out of brewing!
    • BeerSmith
Re: Whirlpool temps on the Brewstep report
« Reply #4 on: June 17, 2018, 12:39:43 PM »
I just added the steep temps to the reports for ingredient listings and the brew steps - it will be in the first update - likely later this week.

Brad
Get a free trial of BeerSmith 3 here

Offline bobo1898

  • Instagram @bierdedbrewing
  • BeerSmith Grandmaster Brewer
  • *****
  • Posts: 217
  • Beer Brewed By Men With Beards
Re: Whirlpool temps on the Brewstep report
« Reply #5 on: June 19, 2018, 03:10:34 PM »
There is also a delay "addition" (appropriately titled 'Whirlpool Delay')which will if you add it to the recipe and set the entire time of whirlpool from flame out will give you a timer delay in the whirlpool additions to account from flame out to the first addition at temperature xxx degrees.

Where are you finding this?

The Whirlpool pause is added as if it were another hop and is located in the hop profiles.

If I'm understanding this correctly, I should find this in the "add hop" option, right? And it should be under use? Forgive me if I'm misunderstanding you.
PRIMARY
SECONDARY
ON DECK
   Wild Ale on Blackberries w/ Champagne yeast
   BA Sour Kolsch w/ Cherries
   Belgian Quad
SERVED/STILL ENJOYING
   Peach Cider
   Patersbier
   Wild Ale with Champagne yeast
   BA Espresso Milk Stout
   BA RIS
   BA RIS w/ bannanas, cinammon, almonds
   BA Gldn Strong

Offline Oginme

  • BeerSmith Grandmaster Brewer
  • *****
  • Posts: 3115
  • Goats, guitars, and a home brew; Life is good!
    • Longvu LaManchas
Re: Whirlpool temps on the Brewstep report
« Reply #6 on: June 19, 2018, 05:18:22 PM »
The "whirlpool pause hop" is located in the hop profiles.  You add it to the recipe as a 'hop' and change it to be a whirlpool hop addition, giving it a time which will last from flame out to the end of the whirlpool hopping and start of chilling.  This will align it as the first 'hop' used and will space out the other whirlpool hop additions to match your process.

Recycle your grains, feed them to a goat!

Offline bobo1898

  • Instagram @bierdedbrewing
  • BeerSmith Grandmaster Brewer
  • *****
  • Posts: 217
  • Beer Brewed By Men With Beards
Re: Whirlpool temps on the Brewstep report
« Reply #7 on: June 20, 2018, 06:58:59 AM »
Okay so I have to create this hop myself? Or are you saying it should be there already? I'm not seeing it in my hop profiles (see photo).
PRIMARY
SECONDARY
ON DECK
   Wild Ale on Blackberries w/ Champagne yeast
   BA Sour Kolsch w/ Cherries
   Belgian Quad
SERVED/STILL ENJOYING
   Peach Cider
   Patersbier
   Wild Ale with Champagne yeast
   BA Espresso Milk Stout
   BA RIS
   BA RIS w/ bannanas, cinammon, almonds
   BA Gldn Strong

Offline Oginme

  • BeerSmith Grandmaster Brewer
  • *****
  • Posts: 3115
  • Goats, guitars, and a home brew; Life is good!
    • Longvu LaManchas
Re: Whirlpool temps on the Brewstep report
« Reply #8 on: June 20, 2018, 07:23:59 AM »
I may have made it in BS2 and it carried over.  It is easy enough to make, just add a hop and give it no real properties.
Recycle your grains, feed them to a goat!

Offline bobo1898

  • Instagram @bierdedbrewing
  • BeerSmith Grandmaster Brewer
  • *****
  • Posts: 217
  • Beer Brewed By Men With Beards
Re: Whirlpool temps on the Brewstep report
« Reply #9 on: June 20, 2018, 07:27:25 AM »
Okay, great! I shall create this. Thanks!
PRIMARY
SECONDARY
ON DECK
   Wild Ale on Blackberries w/ Champagne yeast
   BA Sour Kolsch w/ Cherries
   Belgian Quad
SERVED/STILL ENJOYING
   Peach Cider
   Patersbier
   Wild Ale with Champagne yeast
   BA Espresso Milk Stout
   BA RIS
   BA RIS w/ bannanas, cinammon, almonds
   BA Gldn Strong