Author Topic: Help with Cobra Tap Tower  (Read 1503 times)

Offline Krypis

  • BeerSmith New Brewer
  • *
  • Posts: 1
  • BeerSmith 2 Rocks!
Help with Cobra Tap Tower
« on: March 24, 2019, 11:34:13 PM »
Hi

I have just purchased and mounted a Cobra Tap Tower with 2 faucets and plan on having the kegs in a fridge in the basement directly underneath the kitchen.

I?m struggling with removing the 2 beer lines that came pre installed.

It seams like they become hung up on the gasket/ threads.

Can I sacrifice the casket an buy a new one?

See picture

Offline dtapke

  • BeerSmith Grandmaster Brewer
  • *****
  • Posts: 452
Re: Help with Cobra Tap Tower
« Reply #1 on: March 25, 2019, 09:09:46 AM »
That picture isn't exactly helpful. the cobra is designed to be run with glycol, are you trying to remove the glycol lines?  you should have two 1/4" JG beer lines and two 3/8" glycol lines. The tower is not designed to be disassembled.

also, depending on the distance travelling you may want to get glycol cooled tap lines, and make sure you're running the correct line balance. remote kegs are a bit tricky... JG makes a nice line/system for this.
32g eHERMS
Drinking: Dopplebock, NEIPA, Pils
Primary: empty
Secondary/Lagering:
Next Brew: RIS