Author Topic: Racking/Auto-Syphon Tubing.  (Read 1594 times)

Offline RiverBrewer

  • BeerSmith Grandmaster Brewer
  • *****
  • Posts: 208
  • BeerSmith 3+ Rocks!
Racking/Auto-Syphon Tubing.
« on: July 03, 2020, 08:52:59 AM »
Beware:     I had 3 Cornelius keg batch. As consumption progressed, the remaining kegs (1 1/2) contaminated by day 40. Not having a batch go bad in 75+ brew sessions, I reconnoitered, my Starsan mix was 2 months old made with RO not distilled water and my vinyl auto-syphon hose had an ugly beery chemical odor even after PBW cleaning. I change my vinyl every year, so it was time. I went to my brewing supply spare parts foot locker, and was shocked at the intense nasty chemical odor when I opened it. Source: The vinyl roll I had purchased from the #1 retail hardware distributer  in the country.(the #2 has the same). Made in China!  So the trip begins to the LHBS where there has been a large wooden spool of vinyl for 15 years. Slight odor but doable. OK, I got home and ordered a 10 ft. length of 1/2" ID  5/8" OD tygon PVC dairy/beverage grade. Pricey, and it is amazing how if your fortunate you can build a system worth $$thousands$$ and you cheap out on buying an eighty eight cent jug of DW and a racking hose!
I just can't wait for the replies: I used the same hose for 10+ years. Luv ya brothers & sisters......Protect the cold side!
« Last Edit: July 03, 2020, 08:58:21 AM by RiverBrewer »
Enjoy good beer daily.....Hell is a dry town!
Retired with an Ultra Limited ride!

 

modification