Author Topic: Brew Steps - Water Volume Measurement Mismatch  (Read 854 times)

Offline benjooster

  • BeerSmith Apprentice Brewer
  • **
  • Posts: 3
  • Newer to all-grain, excited to learn!
Brew Steps - Water Volume Measurement Mismatch
« on: October 13, 2020, 03:01:21 PM »
Hey all, am I missing something here? I've set all of my measurements to gallons but my mash in the brew steps still says Liters. Any ideas?


Offline Oginme

  • BeerSmith Grandmaster Brewer
  • *****
  • Posts: 3150
  • Goats, guitars, and a home brew; Life is good!
    • Longvu LaManchas
Re: Brew Steps - Water Volume Measurement Mismatch
« Reply #1 on: October 13, 2020, 04:51:12 PM »
There are two volume measurements: one for batch size and one for mash volumes.  The easiest thing to do is to go to the bottom of the units section and click on 'set to English units'.

Better yet, switch to metric.  :P, it really is much easier in the long run...  ;D
Recycle your grains, feed them to a goat!

Offline benjooster

  • BeerSmith Apprentice Brewer
  • **
  • Posts: 3
  • Newer to all-grain, excited to learn!
Re: Brew Steps - Water Volume Measurement Mismatch
« Reply #2 on: October 13, 2020, 08:21:47 PM »
Hah, excellent. What a boneheaded move!

Also, my brewing partner is a German chemist so I think it's likely we'll convert at some point haha.

Thanks Oginme!