Author Topic: blichmann therminator  (Read 6348 times)

Offline econolinevan

  • BeerSmith Master Brewer
  • ****
  • Posts: 55
blichmann therminator
« on: March 20, 2011, 09:21:05 PM »
I have just ordered one of these since I am going to the ten gallon batches.  Anyone out there have any experience to share about theirs?   :) :( 

Offline Maplecitybrewer

  • BeerSmith Brewer
  • ***
  • Posts: 39
  • Fear No Beer
Re: blichmann therminator
« Reply #1 on: March 24, 2011, 08:58:50 PM »
The therminator has been one the best investments I made. Add the thrumometer( Northern Brewer $25) on the outlet, really makes it nice. You can dial temps in by adjusting cold water to keep your temp consistant. It will cool your wort as fast as you can pump it thru it.


MCB
Fear No Beer!

Offline jomebrew

  • Global Moderator
  • BeerSmith Grandmaster Brewer
  • *****
  • Posts: 1044
    • Jomebrew
Re: blichmann therminator
« Reply #2 on: March 25, 2011, 12:43:16 PM »
I have the thrumometer and the therminator fed by a march pump which is connected to the brew kettle.  P have an ice chest full of ice water to chill the plate chiller. I have a ball valve after the thrumometer to control the flow rate.    I usually circulate back into the kettle for 10 minutes to sterilize the plate chiller.   I then reduce the flow rate and turn on the pond pump that pushed the icewater through the plate chiller.  I continue to adjust the flow rate and monitor the thrumometer to hit a my target temp.   This can be pretty tricky and I don't have it nailed yet, but that is the gist of how I do it.

Offline Ziggybrew

  • BeerSmith Grandmaster Brewer
  • *****
  • Posts: 162
Re: blichmann therminator
« Reply #3 on: March 26, 2011, 05:04:23 PM »
Has anyone had any experience with those "cheaper" 40-plate chillers? I have a Blichmann 20 and love their products, but if I can achieve the same effect for less than half the price, I'm all ears.