Author Topic: PICO SCREEN in Keggle 15.5  (Read 3709 times)

Offline beercheer4me

  • BeerSmith Master Brewer
  • ****
  • Posts: 94
  • Brewing for 6 plus years, Geat hobby,
PICO SCREEN in Keggle 15.5
« on: May 02, 2011, 04:58:55 AM »
How many keggle brewers use this screen and how did you set up your equ. profile
I like the screen and needing to do a brewing eff. because i am getting better Mash eff, then 75 precent
I am try to dial in my brewhouse Eff.. and needing help on that matter
thanks
I really like this screen
I brewed again yesterday here is my results
10 brew
pre boil was at 1.052
SG 10.60
pounds of grain was 20.26
beersmith calaulation was 1.052 on SG
going to look in my books to figure out how to check Brewing eff.
Thanks
3 kettle keg 15.5 , 2 pumps, plate chiller, oxygen setup, lager box,4 taps, 8 plus better bottles and glass carboys ,R.O. Water System, PICO screen from adventures home brew, great screen i like it up to 80 percent effiencent
at times , into yeast ranching now
ON tap

maddspoiler

  • Guest
Re: PICO SCREEN in Keggle 15.5
« Reply #1 on: May 22, 2011, 07:54:35 AM »
If you enter the measured gravity into beersmith it will change you efficiency automatically on that recipe. This will tell you your efficiency from that mash. To adjust your profile you will need to do this over 5-10 batches then figure your average efficiency. After that just use your average efficiency as your brewhouse efficiency on beersmith. Mine is about 78% with a 5 gallon gott with a kettle screen~fly sparging. If what you told me was correct you eff was 86%  :o
« Last Edit: May 22, 2011, 07:58:31 AM by maddspoiler »

 

modification