Author Topic: Milwaukee MA871 refractometer  (Read 9312 times)

KernelCrush

  • Guest
Milwaukee MA871 refractometer
« on: November 24, 2013, 09:26:05 AM »
I cant say enough good things about this item.  Been using it for a year now or more.  No more staring thru an eyepiece. No more reading glasses to find the meniscus.  If only they would come out with a pH meter to match it.

http://www.milwaukeeinst.com/site/products/products/digital-refractometers/165-products-g-digital-refractometers-g-ma871

Offline brewfun

  • BeerSmith Grandmaster Brewer
  • *****
  • Posts: 2288
  • Malt dust is just alcohol's glitter
Re: Milwaukee MA871 refractometer
« Reply #1 on: November 24, 2013, 12:01:08 PM »
I have one of these, too. We use to verify first runnings, last runnings and post boil gravity.

I'm curious, though do you cool your wort sample before taking a reading? I find that it reads low until the sample is about 80F or cooler.
Beer Appreciation is the space between pints.

KernelCrush

  • Guest
Re: Milwaukee MA871 refractometer
« Reply #2 on: November 24, 2013, 02:48:28 PM »
Yes I pull a sample and cool it.  I never tested above 80F so I cant say.   

Offline ihikeut

  • BeerSmith Grandmaster Brewer
  • *****
  • Posts: 199
  • BeerSmith 2 Rocks!
Re: Milwaukee MA871 refractometer
« Reply #3 on: November 26, 2013, 07:00:49 PM »
Just a quick question. I looked on their web site and could not find a price or how to order.

Offline brewfun

  • BeerSmith Grandmaster Brewer
  • *****
  • Posts: 2288
  • Malt dust is just alcohol's glitter
Re: Milwaukee MA871 refractometer
« Reply #4 on: November 26, 2013, 09:13:50 PM »
I spent $125. Currently it is $100 on Amazon.
Beer Appreciation is the space between pints.

Offline slash2000

  • BeerSmith Apprentice Brewer
  • **
  • Posts: 3
  • BeerSmith 2 Rocks!
Re: Milwaukee MA871 refractometer
« Reply #5 on: November 26, 2013, 11:19:16 PM »
I would be interested in getting one of these, what have you guys calculated for the wort correction factor? Do you find it's accurate most of the time (after correction)?

KernelCrush

  • Guest
Re: Milwaukee MA871 refractometer
« Reply #6 on: November 27, 2013, 06:33:11 AM »
I calibrated mine with distilled when I got it and then did the calibrate refractometer function under Beersmith's refractometer tool tab.  You basically divide your wort refractometer reading by your wort hydrometer reading to get this result.  Mine is .95697.  I rechecked my distilled water calibration last night and it had drifted .3 Brix / .001 gravity in a year of heavy use. I really havent checked it much as it always gave me what the recipe predicted when there werent other issues.  I think I may have crosschecked it with a hydrometer twice and it was bang on. I am going to check it at various temps this weekend.

KernelCrush

  • Guest
Re: Milwaukee MA871 refractometer
« Reply #7 on: November 28, 2013, 07:31:58 AM »
Quote
I'm curious, though do you cool your wort sample before taking a reading? I find that it reads low until the sample is about 80F or cooler.

I guess I misread this.  When you said 'reads low' I took it that you got a lower Brix reading than you expected.  I tried my unit at higher temps and  my display read "LO" too until the sample dropped below 80.  Seems strange.  The manual says its ATC up to 104F.  I guess not.  I will just continue to cool my samples, only takes a minute with the few ml needed.  I looked in the manual and it says if there is a 'big' difference between the instrument and sample temps then you should give it a minute to come into equilibrium.  Still gonna send them an email.