Author Topic: Beer XML Tags for Beersmith 3 parameters  (Read 1694 times)

Offline DrZymurgy

  • BeerSmith Apprentice Brewer
  • **
  • Posts: 19
  • BeerSmith 3 Rocks!
Beer XML Tags for Beersmith 3 parameters
« on: April 26, 2020, 09:55:50 PM »
I am working on updating my custom reports and was wondering if anyone new what the beerxml tags for the following parameters are:

End of Running Gravity
Pre-Boil Gravity
Water to Grain Ratio
Sulfate to Chloride Ratio
Adjusted Water Profile
HBU
Measured Pre-Boil Volume
Yeast Nitrogen Requirement
Target Sulfite Level
Ingredient Source Code.

Also is there a way to get the alpha to beta ratio of all the hops or is this a hand calculation?

Anyone have an updated beerxml reference specific for Beersmith since I have been trying hit or miss with the existing beerxml references.

Thanks,

Offline GigaFemto

  • BeerSmith Grandmaster Brewer
  • *****
  • Posts: 356
  • Muonic Matter Rocks!
Re: Beer XML Tags for Beersmith 3 parameters
« Reply #1 on: April 27, 2020, 08:14:02 PM »
I know one of them: $PRE_BOIL_OG.

--GF

Offline x3la

  • BeerSmith Brewer
  • ***
  • Posts: 45
  • Cask. Real Ale enthusiast. Polypin home brewer.
Re: Beer XML Tags for Beersmith 3 parameters
« Reply #2 on: April 30, 2020, 02:39:37 PM »
The $PRE_BOIL_OG @GigaFemto mentions is referenced here along with others: http://beersmith.com/help2/index.html?custom_reports.htm

It looks like "Appendix A" at the bottom of the document below might help, it references the water to grain ratio ($WATER_GRAIN_RATIO) you're looking for:

http://www.beerxml.com/beerxml.htm

There may be something of use here, appears to be an archive of BeerXML/Schemas etc:

https://github.com/brewpoo/BeerXML-Standard

Offline x3la

  • BeerSmith Brewer
  • ***
  • Posts: 45
  • Cask. Real Ale enthusiast. Polypin home brewer.
Re: Beer XML Tags for Beersmith 3 parameters
« Reply #3 on: April 30, 2020, 02:53:26 PM »
The following thread appears to have the definitive list derived from source code:

http://www.beersmith.com/forum/index.php/topic,6200.0.html

$running_gravity is present

Here are more: http://www.beersmith.com/forum/index.php/topic,1465.0.html


Offline DrZymurgy

  • BeerSmith Apprentice Brewer
  • **
  • Posts: 19
  • BeerSmith 3 Rocks!
Re: Beer XML Tags for Beersmith 3 parameters
« Reply #4 on: May 01, 2020, 05:15:18 PM »
Thanks for everyone's input.  As I have mentioned I have dug around these and some of the codes listed don't work or give the wrong data.

$Running_gravity does give the end of running gravity
$WATER_GRAIN_RATIO does not work
$PRE_BOIL_OG gives the estimated pre-boil OG not the measured Preboil OG

I can get Sulfate-Chloride Ratio by Copying value into Runoff pH box and First Wort Gravity by entering it into End of Run Gravity. 

Here is the latest version of my report.


Offline DrZymurgy

  • BeerSmith Apprentice Brewer
  • **
  • Posts: 19
  • BeerSmith 3 Rocks!
Re: Beer XML Tags for Beersmith 3 parameters
« Reply #5 on: May 09, 2020, 06:34:34 AM »
Here's a report I constructed for Winemaking.  Both reports are 2 pages so I can paste them into these logbooks.

https://kegscode.com/product-category/journals/