Author Topic: Muntons Grains and extracts  (Read 13134 times)

joet56

  • Guest
Muntons Grains and extracts
« on: May 20, 2005, 11:11:47 AM »
Anyone have the details on Muntons grains and extracts so I can add the to my grain listing  ;D

Offline BeerSmith

  • Brewer, Author, Patriot
  • BeerSmith Administrator
  • BeerSmith Grandmaster Brewer
  • *****
  • Posts: 5557
  • BeerSmith - take the guesswork out of brewing!
    • BeerSmith
Re: Muntons Grains and extracts
« Reply #1 on: May 20, 2005, 03:54:25 PM »
Sure,
 The parameters are here:
   http://www.muntons.com/muntons_malt/typical_analysis/alemalt.asp

However, I don't recall anyone having loaded them into BeerSmith.  However, there are only a few malts they offer, so it should be a pretty quick job if anyone wants to take the task on.

 Let me know if you happen to enter them - otherwise I may do it myself next week if I can find a few minutes.

Cheers!
Brad
 
Get a free trial of BeerSmith 3 here

joet56

  • Guest
Re: Muntons Grains and extracts
« Reply #2 on: May 21, 2005, 04:07:11 PM »
Ok, you may like this- I'm planing to make an Irish red ale and I want to use all british grain so I walk into my local brewshop (Mojo brew shop) and ask one of the owners "Do you have Crisp grains?"

She gives me a great what the hell are you talking about look and answers "Our our grains crisp?  What do you mean?" Needless to say a few uneazy moments followed while I explained it was a British Malting company established in 1804 etc....

They had never heard of Crisp Malting before and the only British grains they carry is the following Mutons:

http://www.muntons.com/homebeer/other-products/grain_malt.asp

So I now have my British grain (Muntons)  for my Irish red ale.

Thanks for your help

BlurryVision

  • Guest
Re: Muntons Grains and extracts
« Reply #3 on: April 06, 2010, 07:56:47 AM »
More information provided by Muntons if anyone can help entering their malts into beersmith.

For comparison 1lb(454g) – 1gall(4.54ltrs) equates to 1000g per 10litres on the chart. If you require anything else then please let me know. Regards Graham
 
See attached tables.

If anyone wants to point me in the correct direction of transfering EBC to SRM , and if I am correct to use "1028 - liquid" and "1037 - dry" as the SG, I would be happy to import these into beersmith and upload for others to download into their system.

Thanks.
Ryan.
« Last Edit: April 06, 2010, 08:01:36 AM by BlurryVision »

Offline odi3

  • BeerSmith New Brewer
  • *
  • Posts: 1
  • BeerSmith 2 Rocks!
Re: Muntons Grains and extracts
« Reply #4 on: April 03, 2012, 05:05:57 PM »
I am trying to figure out how to add muntons info to beersmith too.

Anyone end up figuring this out?

 

modification